CompTIA A+ Core 2 · 220-1202

Objective 4.4: Safety procedures

Try it now: 8 quick questions on this objective, no account needed.

Objective 4.4 · Safety

1 / 8
Quick scenario

Which type of fire extinguisher is safe to use on an electrical fire involving energised computer equipment?

Practice questions for A+ Core 2 objective 4.4, “Safety procedures.” Every question is original, written to the 220-1202 exam objectives, and comes with a full explanation — answer them below to see instant grading.

This objective sits in Domain 4.0: Operational Procedures, which is about 21% of the exam — so mastering it moves your readiness score meaningfully.

More 4.4 practice questions

Objective 4.4 · practice questions

1 / 5
Exam style

When handling a CRT monitor that is being decommissioned, what safety precaution is MOST critical?

All 5 questions, with answers
  1. 1.When handling a CRT monitor that is being decommissioned, what safety precaution is MOST critical?

    • A.Wearing an ESD wrist strap to protect the CRT circuits
    • B.Discharging the high-voltage capacitor before touching internal components
    • C.Placing the CRT face-down on an ESD mat
    • D.Removing the electron gun before transport

    Answer: B. Discharging the high-voltage capacitor before touching internal components. CRT monitors contain high-voltage capacitors that can retain a lethal charge of tens of thousands of volts even years after the unit has been unplugged. Before any internal work is performed, this capacitor must be properly discharged by a trained technician using appropriate tools. Untrained individuals should never attempt to open a CRT.

  2. 2.An ESD mat is placed on a workbench where components are repaired. What is the purpose of an ESD mat?

    • A.To insulate components from ground and prevent shorts
    • B.To provide a grounded surface that dissipates static charge before it can damage components
    • C.To absorb heat from components during testing
    • D.To prevent dust from accumulating on sensitive parts

    Answer: B. To provide a grounded surface that dissipates static charge before it can damage components. An ESD mat provides a controlled, grounded work surface that slowly dissipates static charges, preventing sudden electrostatic discharge from reaching sensitive electronic components. The mat is bonded to earth ground, and a technician wearing a wrist strap connected to the same ground creates an equipotential environment. Together, they are the primary defence against ESD damage.

  3. 3.A technician accidentally drops a CPU onto a carpeted floor. The room is very dry and the technician feels a slight tingle when retrieving it. What is the MOST likely concern?

    • A.The CPU pins have been damaged beyond repair
    • B.The CPU has been exposed to ESD that may have caused internal damage
    • C.The carpet fibres have contaminated the CPU's thermal interface
    • D.The capacitors in the CPU have discharged on impact

    Answer: B. The CPU has been exposed to ESD that may have caused internal damage. Carpet combined with low humidity is an ideal environment for generating static electricity. A perceptible tingle indicates a static discharge event, which may have subjected the CPU to thousands of volts even if the technician only felt a mild sensation. ESD damage to a CPU may not cause immediate failure but can lead to intermittent issues or premature failure later.

  4. 4.A technician needs to move a large tower server to a different rack. What is the safest lifting technique?

    • A.Bend at the waist, keep legs straight, and lift quickly
    • B.Bend at the knees, keep the back straight, and lift using leg muscles
    • C.Ask a colleague to hold the server from one side while you drag it
    • D.Tilt the server and slide it along the floor without lifting

    Answer: B. Bend at the knees, keep the back straight, and lift using leg muscles. Proper lifting technique requires bending at the knees with feet shoulder-width apart, keeping the back straight, and using the strong muscles of the legs to do the lifting. This minimises the risk of back injury, which is one of the most common workplace injuries in IT roles. Heavy equipment should also be moved with a hand truck whenever possible.

  5. 5.While tidying a network rack, a technician bundles the patch cables. Which practice is BEST?

    • A.Use hook-and-loop ties, label both ends of each cable, and keep bends gentle
    • B.Pull plastic zip ties as tight as possible, so that the bundles can't move or sag
    • C.Bundle the power cords tightly together with the network cables
    • D.Leave the cables loose and unlabeled so they're easier to trace

    Answer: A. Use hook-and-loop ties, label both ends of each cable, and keep bends gentle. Hook-and-loop ties hold bundles without crushing cables and are easy to reopen, labels make tracing quicker, and gentle bends avoid damaging copper pairs and fiber. Over-tightened zip ties can deform cables and hurt performance, bundling power cords tightly with data cables can cause interference, and loose cables tangle, block airflow and make tracing harder.

Learn 4.4 and every other objective

Your A+ Core 2 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.

Start my A+ Core 2 path

No account needed to start.

More objectives in Domain 4.0

← All A+ Core 2 220-1202 objectives