CompTIA A+ Core 1 · 220-1201
Objective 1.1: Monitor mobile device hardware and use the right replacement techniques
Try it now: 8 quick questions on this objective, no account needed.
Objective 1.1 · Mobile device hardware
1 / 8Which laptop storage form factor uses a keyed edge connector and is available in 2242, 2260, and 2280 lengths?
Practice questions for A+ Core 1 objective 1.1, “Monitor mobile device hardware and use the right replacement techniques.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 1.0: Mobile Devices, which is about 13% of the exam — so mastering it moves your readiness score meaningfully.
More 1.1 practice questions
Objective 1.1 · practice questions
1 / 5Which laptop storage form factor uses a keyed edge connector and is available in 2242, 2260, and 2280 lengths?
All 5 questions, with answers
1.Which laptop storage form factor uses a keyed edge connector and is available in 2242, 2260, and 2280 lengths?
- A.2.5-inch SATA
- B.mSATA
- C.M.2
- D.PCIe Add-in Card
Answer: C. M.2. M.2 drives use an edge connector and are available in multiple widths and lengths; the four-digit code describes millimetre dimensions (e.g., 2280 = 22 mm wide, 80 mm long). mSATA uses a different, older mini-PCIe-style connector and is not described by these length codes. 2.5-inch SATA drives use a standardised enclosure with SATA data and power connectors rather than an edge connector.
2.A privacy screen protector is being applied to a laptop used in a shared office space. What is the primary security benefit of this accessory?
- A.It prevents the display from emitting blue light, reducing eye strain
- B.It limits the viewing angle so only the person directly in front can read the screen
- C.It acts as an anti-glare coating to improve outdoor visibility
- D.It blocks RF emissions from the display to prevent data interception
Answer: B. It limits the viewing angle so only the person directly in front can read the screen. A physical privacy filter uses micro-louver technology to darken the screen from side angles, preventing shoulder-surfing by people seated or standing to the side. Anti-glare coatings and blue-light filters are separate display accessories that address eye comfort rather than visual privacy. RF shielding is not a feature of standard privacy screen protectors and is unrelated to visual eavesdropping.
3.A laptop display has a very narrow physical border around the screen (thin bezel design) and the webcam is located below the display rather than above. What is a practical disadvantage of this below-display webcam placement?
- A.The webcam cannot support HD resolution in this position
- B.Video call participants see an unflattering upward-angle view of the user's face and chin
- C.The webcam signal interferes with the Wi-Fi antenna when placed below the screen
- D.The digitizer layer blocks infrared signals from the webcam
Answer: B. Video call participants see an unflattering upward-angle view of the user's face and chin. When the webcam is below the display (to accommodate the thin top bezel), it captures video from a low angle looking up at the user's face and chin, which most people find unflattering and gives the impression of the user looking downward, away from their audience. Webcam resolution is not affected by position within the chassis. Webcam and Wi-Fi antenna signals operate on completely different spectrum and do not interfere.
4.When replacing a laptop keyboard, a technician notices a thin ribbon cable connecting the keyboard to the motherboard. What type of connector typically secures this ribbon cable?
- A.Molex connector
- B.ZIF (Zero Insertion Force) connector
- C.PCIe x1 connector
- D.RJ-45 connector
Answer: B. ZIF (Zero Insertion Force) connector. Laptop keyboard ribbon cables use ZIF connectors, which have a flip-up locking bar that allows the cable to be inserted and removed with zero insertion force, preventing damage to the fragile ribbon. Molex connectors are used for power in desktop systems and are far too large for a keyboard ribbon. PCIe and RJ-45 connectors are completely unrelated to keyboard ribbon cables.
5.After replacing a laptop HDD with an SSD, the technician notices the SSD is significantly faster for reads but the OS takes the same time to shut down. What step was most likely skipped?
- A.Enabling AHCI mode in BIOS instead of IDE/Compatibility mode
- B.Formatting the SSD with FAT32
- C.Installing the SSD upside-down in the bay
- D.Disabling the paging file on the SSD
Answer: A. Enabling AHCI mode in BIOS instead of IDE/Compatibility mode. Running an SSD in IDE/Compatibility mode disables native SATA command queuing and TRIM support, significantly reducing write performance and OS shutdown speed; switching to AHCI mode in BIOS (before OS installation for clean installs) unlocks full SSD features. FAT32 is inappropriate for a Windows system drive; NTFS is required. Disabling the paging file would affect virtual memory, not shutdown performance related to storage controller mode.
Learn 1.1 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.