Free CompTIA A+ Core 1 (220-1201) practice test

Start with 9 quick questions, no account needed.

A+ Core 1 warm-up

1 / 9
Recall

443

Which protocol?

Written to 220-1201, today's A+ Core 1 exam. It replaced 220-1101, which CompTIA retired on September 25, 2025.

Core 1 is the hardware and networking half of A+: mobile devices, networking, hardware, virtualization and cloud computing, and hardware and network troubleshooting. Every question here is original, written to the 220-1201 objectives, with a full explanation. CertBench holds 650+ Core 1 questions across all 27 objectives.

Try the warm-up above and the samples below, then take the free readiness check for an estimate by domain, no account needed.

Exam-style sample questions

10 exam-style questions, one at a time, each explained as soon as you answer. The full bank holds 651.

A+ Core 1 · sample questions

1 / 10
Exam style

A workstation's storage LED is continuously lit without any user activity. What does this indicate?

All 10 questions, with answers
  1. 1.A workstation's storage LED is continuously lit without any user activity. What does this indicate?

    • A.The drive is in a power-saving sleep mode
    • B.The system is experiencing high disk activity, possibly due to paging or malware
    • C.The drive firmware is updating automatically
    • D.The SATA cable is loose

    Answer: B. The system is experiencing high disk activity, possibly due to paging or malware. A continuously lit drive activity LED during periods of expected inactivity suggests heavy background disk activity, which can be caused by Windows indexing, updates, excessive paging due to low RAM, or malware. Drive sleep mode would turn off the LED, not keep it lit. Persistent disk activity with no visible user cause warrants investigation of background processes and potential malware scanning.

  2. 2.Which USB connector type is reversible and used on both hosts and devices in USB 3.1 and later standards?

    • A.USB-A
    • B.USB-B
    • C.USB Micro-B
    • D.USB-C

    Answer: D. USB-C. USB-C features a symmetrical oval connector that can be inserted in either orientation, eliminating the need to orient the plug correctly. USB-A is the rectangular host connector found on computers and is not reversible. USB-B and Micro-B are device-side connectors with specific orientations required for insertion.

  3. 3.Which laptop storage form factor uses a keyed edge connector and is available in 2242, 2260, and 2280 lengths?

    • A.2.5-inch SATA
    • B.mSATA
    • C.M.2
    • D.PCIe Add-in Card

    Answer: C. M.2. M.2 drives use an edge connector and are available in multiple widths and lengths; the four-digit code describes millimetre dimensions (e.g., 2280 = 22 mm wide, 80 mm long). mSATA uses a different, older mini-PCIe-style connector and is not described by these length codes. 2.5-inch SATA drives use a standardised enclosure with SATA data and power connectors rather than an edge connector.

  4. 4.When placing a wireless access point in a SOHO environment, which location provides the best coverage for a single-story office?

    • A.In a corner of the building for maximum signal reflection
    • B.Near the floor to minimise interference with desk equipment
    • C.Centrally located, mounted high on the wall or ceiling
    • D.Adjacent to the DSL modem to minimise cable length

    Answer: C. Centrally located, mounted high on the wall or ceiling. Mounting a wireless AP centrally and at height (ceiling or high on a wall) maximises omnidirectional signal coverage and reduces obstacles that could attenuate the signal. Placing an AP in a corner results in much of the signal radiating outside the building. The AP should be positioned to serve users, not necessarily near the modem — cable length between modem and AP is not a primary concern with structured cabling.

  5. 5.A technician is configuring firewall rules and needs to allow outbound POP3 traffic for email retrieval. Which port must be permitted?

    • A.25
    • B.110
    • C.143
    • D.587

    Answer: B. 110. POP3 (Post Office Protocol version 3) uses port 110 for retrieving email from a mail server to the client device. Unlike IMAP, POP3 typically downloads and deletes messages from the server, storing them locally. Port 25 is SMTP (server-to-server), port 143 is IMAP, and port 587 is authenticated SMTP submission.

  6. 6.A database server requires storage with the lowest possible random read latency for transaction processing. Which storage solution is best?

    • A.15,000 RPM SAS HDD
    • B.SATA SSD
    • C.NVMe SSD (PCIe Gen 4)
    • D.RAID 5 array of 7200 RPM HDDs

    Answer: C. NVMe SSD (PCIe Gen 4). NVMe SSDs on PCIe Gen 4 achieve random read latencies of under 100 microseconds and extremely high IOPS, far exceeding SATA SSDs and spinning disks for database transaction workloads. SATA SSDs offer much better latency than HDDs but are constrained by the SATA interface. RAID 5 with HDDs improves sequential throughput but does not address the inherent rotational latency of spinning disks.

  7. 7.A user needs to print a confidential document and wants to ensure it is not printed until they authenticate at the printer. Which feature provides this capability?

    • A.Cloud printing
    • B.Secure/PIN printing (pull printing)
    • C.Duplex printing
    • D.Collation

    Answer: B. Secure/PIN printing (pull printing). Secure printing (also called PIN printing or pull printing) holds the print job in the printer's memory queue until the user enters a PIN or authenticates at the printer's control panel, preventing sensitive documents from sitting unattended in the output tray. Cloud printing sends jobs to a remote print queue. Duplex and collation are output formatting features.

  8. 8.A user complains that their LCD monitor shows persistent images of previously displayed content even when the screen content changes. What is this display defect called?

    • A.Dead pixel
    • B.Image burn-in (persistence)
    • C.Pixel inversion
    • D.Backlight bleed

    Answer: B. Image burn-in (persistence). Image burn-in (or screen burn) occurs when static images are displayed for extended periods, causing permanent phosphor or organic material degradation that leaves ghost images. Dead pixels are single unresponsive dots, not persistent ghost images. To prevent burn-in on OLEDs and LCDs, use screensavers, auto-dimming, and avoid displaying static content for prolonged periods.

  9. 9.A Windows PC showed a full-screen stop error ('Your device ran into a problem and needs to restart') and restarted before the user could note the stop code. Where can the technician find the code?

    • A.Device Manager
    • B.Task Manager's Startup tab
    • C.The System log in Event Viewer
    • D.The boot order menu in UEFI firmware setup

    Answer: C. The System log in Event Viewer. When Windows starts again after a stop error, it records a BugCheck event with the stop code in the System log, and it saves a memory dump for deeper analysis. The stop error screen is blue on Windows 10 and black on current Windows 11 versions. Device Manager lists hardware, Task Manager's Startup tab manages startup apps, and the boot order menu chooses boot devices; none of them records the stop code.

  10. 10.A company's mail service now requires TLS 1.2 for sending. Since the change, an older multifunction printer can't send scan-to-email messages, while PCs send mail normally. The printer's settings offer no TLS 1.2 option. What should the technician do?

    • A.Install a newer printer driver on the PCs
    • B.Set the printer's scan resolution to 300 dpi
    • C.Send scan-to-email on port 25 without encryption
    • D.Update the printer's firmware to add TLS 1.2

    Answer: D. Update the printer's firmware to add TLS 1.2. Scan-to-email runs on the printer itself, so the printer's firmware is what needs TLS 1.2 support; manufacturers added it to many older models through firmware updates. PC drivers play no part in scan-to-email, scan resolution has nothing to do with encryption, and a service that requires TLS 1.2 would refuse an unencrypted connection.

What the exam covers

1.0Mobile Devices13% of exam
2.0Networking23% of exam
3.0Hardware25% of exam
4.0Virtualization and Cloud Computing11% of exam
5.0Hardware and Network Troubleshooting28% of exam

Practice by exam objective

Drill a specific objective — each page has its own set of questions with explanations.

Keep practising — free

Other CompTIA practice tests

Study it one short step at a time

The guided path walks every exam objective in quick rounds like the questions above, then a readiness checkpoint shows where you'd stand today.

Start my path

No account needed to start.

Frequently asked questions

How many questions are on A+ Core 1?

220-1201 has a maximum of 90 questions in 90 minutes, a mix of multiple-choice and performance-based questions. The passing score is 675 on a scale of 100 to 900.

What does 220-1201 cover?

Five domains: mobile devices (13%), networking (23%), hardware (25%), virtualization and cloud computing (11%), and hardware and network troubleshooting (28%), the largest. That runs from laptop parts and Wi-Fi standards to RAID, printers and cloud models.

What changed from 220-1101?

220-1201 replaced 220-1101, which CompTIA retired on September 25, 2025. Most topics carried over and the objectives were renumbered; the troubleshooting methodology is no longer tested on its own. Every question here sits under its 220-1201 objective.

Should I take Core 1 or Core 2 first?

Most people take Core 1 first: its hardware and networking foundation comes up again in Core 2's troubleshooting. There's no rule, but you need both cores, from the same series, to earn A+.

Are these real A+ exam questions?

No. They're original questions written to the 220-1201 objectives at exam-level difficulty, with explanations. Braindumps violate CompTIA policy and can void your certification.

Is this Core 1 practice test free?

Yes. The warm-up, the sample questions and the readiness check are free with no account. A free account saves your progress and opens your Core 1 path through its readiness checkpoint; Pro opens the rest, with full-length timed exams and every PBQ lab.