CompTIA A+ Core 1 · 220-1201
Objective 5.3: Troubleshoot video, projector and display issues
Try it now: 8 quick questions on this objective, no account needed.
Objective 5.3 · Display and projector problems
1 / 8A single pixel on an LCD monitor always appears white, regardless of the surrounding content. How is this defect classified?
Practice questions for A+ Core 1 objective 5.3, “Troubleshoot video, projector and display issues.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 5.0: Hardware and Network Troubleshooting, which is about 28% of the exam — so mastering it moves your readiness score meaningfully.
More 5.3 practice questions
Objective 5.3 · practice questions
1 / 5A user complains that their LCD monitor shows persistent images of previously displayed content even when the screen content changes. What is this display defect called?
All 5 questions, with answers
1.A user complains that their LCD monitor shows persistent images of previously displayed content even when the screen content changes. What is this display defect called?
- A.Dead pixel
- B.Image burn-in (persistence)
- C.Pixel inversion
- D.Backlight bleed
Answer: B. Image burn-in (persistence). Image burn-in (or screen burn) occurs when static images are displayed for extended periods, causing permanent phosphor or organic material degradation that leaves ghost images. Dead pixels are single unresponsive dots, not persistent ghost images. To prevent burn-in on OLEDs and LCDs, use screensavers, auto-dimming, and avoid displaying static content for prolonged periods.
2.A user reports that colors on their monitor appear oversaturated and unrealistic, with reds appearing very deep and blues appearing purple. The monitor was recently switched from Windows to a Mac and back. What is the MOST likely cause?
- A.The monitor's panel has degraded
- B.An incorrect ICC color profile is applied in the OS display settings
- C.The monitor's backlight color temperature has changed
- D.The video cable is not shielded properly
Answer: B. An incorrect ICC color profile is applied in the OS display settings. Oversaturated or shifted colors that appeared after a system change are most commonly caused by an incorrect ICC color profile being applied — macOS and Windows use different color management approaches that can leave incorrect profiles when switching. A degraded panel would typically cause muted or faded colors, not oversaturation. Reset the color profile to the monitor's default sRGB profile in display settings to restore accurate color reproduction.
3.A user reports their laptop display has vertical colored lines running from top to bottom and the lines remain even when an external monitor is used. What does this indicate?
- A.The LCD panel is damaged
- B.The GPU or video memory is failing
- C.The LCD data cable is loose
- D.The backlight inverter is failing
Answer: B. The GPU or video memory is failing. If vertical lines appear both on the laptop display and on an external monitor connected to the same GPU, the fault must be in the GPU or its memory, since the signal is corrupted before reaching either display. A loose LCD cable or damaged panel would only affect the internal display, not the external monitor. When both outputs show the same artifact, the GPU is the common component causing the issue.
4.An external monitor connected to a laptop via USB-C DisplayPort shows no image, but the same monitor works when connected with HDMI. The USB-C cable is known good. What should the technician investigate?
- A.The monitor's HDMI port is defective
- B.The laptop's USB-C port may not support DisplayPort Alt Mode, or it needs a driver/firmware update
- C.The monitor does not support USB-C connections
- D.The USB-C cable does not support data transfer
Answer: B. The laptop's USB-C port may not support DisplayPort Alt Mode, or it needs a driver/firmware update. Not all USB-C ports support DisplayPort Alt Mode — only those specifically designed for video output do; connecting to a non-video USB-C port or one requiring a firmware update would produce no signal. The monitor working via HDMI confirms the monitor itself is functional. Always verify that the specific USB-C port on the laptop supports DisplayPort Alt Mode — it is often marked with a display icon or noted in the specs.
5.An OLED laptop display develops a permanent discoloration in the shape of a taskbar at the bottom of the screen after extended use. What condition has occurred?
- A.Backlight bleed
- B.Dead pixel cluster
- C.Image retention / burn-in
- D.IPS glow
Answer: C. Image retention / burn-in. OLED displays are susceptible to burn-in (permanent image retention) when static elements — such as a taskbar, status bar, or HUD — are displayed at high brightness for extended periods, causing uneven degradation of organic emitter materials. Backlight bleed is an LCD phenomenon caused by light escaping around the edges of the backlight and does not apply to OLED. IPS glow is a uniform near-edge luminance effect on IPS LCD panels, not OLED burn-in.
Learn 5.3 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.