CompTIA A+ Core 1 · 220-1201
Objective 5.5: Troubleshoot network issues
Try it now: 8 quick questions on this objective, no account needed.
Objective 5.5 · Network problems
1 / 8A network technician observes that a switch port is constantly going up and down in the log every few seconds. What is this condition called?
Practice questions for A+ Core 1 objective 5.5, “Troubleshoot network issues.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 5.0: Hardware and Network Troubleshooting, which is about 28% of the exam — so mastering it moves your readiness score meaningfully.
More 5.5 practice questions
Objective 5.5 · practice questions
1 / 5A user in a large open office reports intermittent wireless connectivity drops. A wireless survey shows their laptop is connecting to an AP 150 feet away instead of one 20 feet away. What is the MOST likely cause?
All 5 questions, with answers
1.A user in a large open office reports intermittent wireless connectivity drops. A wireless survey shows their laptop is connecting to an AP 150 feet away instead of one 20 feet away. What is the MOST likely cause?
- A.The nearby AP has its radio disabled
- B.The laptop has poor wireless roaming behavior — it "sticks" to a distant AP instead of roaming to the closer one
- C.The distant AP has a stronger antenna
- D.The DHCP server is assigning the wrong gateway
Answer: B. The laptop has poor wireless roaming behavior — it "sticks" to a distant AP instead of roaming to the closer one. Wireless clients control roaming decisions, and some devices are aggressive about holding onto an existing connection even when a better AP is available — this is called "sticky client" behavior. Radio strength alone does not explain preferring a distant AP over a closer one if both are configured correctly. The solution is to implement band steering, 802.11r fast roaming, or minimum RSSI thresholds on the APs to force clients to roam appropriately.
2.A remote branch office can access internal resources but cannot access the internet. The main office has internet access. What is the MOST likely cause?
- A.The branch office DNS server is down
- B.A missing or incorrect default route on the branch office router
- C.The branch office's DHCP scope is exhausted
- D.The branch's NTP server is unreachable
Answer: B. A missing or incorrect default route on the branch office router. Internet access requires a default route (0.0.0.0/0) pointing toward the upstream internet gateway; if this route is missing or misconfigured on the branch router, internal routing works but internet-bound traffic has no path. A DNS failure would prevent name resolution but not connectivity to IP addresses. When a branch can reach internal but not external, the default route on the branch router is the first thing to verify.
3.A small office recently upgraded from a 100 Mbps switch to a Gigabit switch. Users report that network speeds have not improved. What is the MOST likely cause?
- A.The Gigabit switch needs a firmware update
- B.The network cables are Cat 5 (not Cat 5e or higher), which cannot reliably support Gigabit speeds
- C.The DHCP server is limiting bandwidth
- D.The workstations need new IP addresses assigned
Answer: B. The network cables are Cat 5 (not Cat 5e or higher), which cannot reliably support Gigabit speeds. Gigabit Ethernet requires Cat 5e or better cabling; original Cat 5 cable cannot reliably support 1000Base-T due to crosstalk specifications, so the ports will negotiate down to 100 Mbps. DHCP servers manage IP addresses, not network speed. Upgrading a switch alone achieves nothing if the cabling infrastructure cannot support the higher speed — check cable category when troubleshooting speed upgrades.
4.A technician runs `ipconfig` on a workstation and notes it has a valid IP address, subnet mask, and gateway, but cannot access network resources. The technician pings the gateway and gets a response. What should the technician check NEXT?
- A.Replace the network cable
- B.Test connectivity beyond the gateway by pinging an external IP and then a DNS name
- C.Reinstall the network adapter driver
- D.Check for duplicate IP addresses on the network
Answer: B. Test connectivity beyond the gateway by pinging an external IP and then a DNS name. With a valid IP, gateway connectivity confirmed, the next logical step is to test external connectivity (ping an external IP) to rule out routing issues, then test DNS resolution, to progressively isolate where connectivity breaks down. Replacing the cable is unnecessary since the gateway responds. Systematic network troubleshooting works layer by layer — local connectivity → gateway → external IP → DNS resolution.
5.New devices connecting to the network are receiving IP addresses in the 10.10.200.x range instead of the expected 192.168.1.x range. A technician traces the issue to an unauthorized wireless router plugged in by an employee. What has occurred?
- A.The authorized DHCP server has failed over to a backup scope
- B.A rogue DHCP server is distributing incorrect network configuration
- C.The network switch has a misconfigured VLAN
- D.The authorized DHCP server has exhausted its address pool
Answer: B. A rogue DHCP server is distributing incorrect network configuration. An unauthorized device running DHCP services is a rogue DHCP server, which competes with the legitimate server and can assign incorrect IP addresses, gateways, and DNS settings to network clients. An exhausted scope would result in no IP assignment, not incorrect assignments. DHCP snooping on managed switches can prevent rogue DHCP servers by blocking DHCP offers on untrusted ports.
Learn 5.5 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.