CompTIA A+ Core 1 · 220-1201

Objective 5.6: Troubleshoot printer issues

Try it now: 8 quick questions on this objective, no account needed.

Objective 5.6 · Printer problems

1 / 8
Quick scenario

A laser printer produces output with toner that smears when touched immediately after printing. Which component is most likely defective?

Practice questions for A+ Core 1 objective 5.6, “Troubleshoot printer issues.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.

This objective sits in Domain 5.0: Hardware and Network Troubleshooting, which is about 28% of the exam — so mastering it moves your readiness score meaningfully.

More 5.6 practice questions

Objective 5.6 · practice questions

1 / 5
Exam style

A user reports that their inkjet printer produces output with horizontal banding — alternating light and dark stripes across the page. What is the MOST likely cause?

All 5 questions, with answers
  1. 1.A user reports that their inkjet printer produces output with horizontal banding — alternating light and dark stripes across the page. What is the MOST likely cause?

    • A.The paper type setting is incorrect
    • B.Clogged or misaligned print head nozzles
    • C.Low ink level in a non-depleted cartridge
    • D.A dirty fuser roller

    Answer: B. Clogged or misaligned print head nozzles. Horizontal banding in inkjet output is caused by clogged nozzles that skip entire rows of ink, creating the stripe pattern. Running the printer's print head cleaning utility resolves nozzle clogs in most cases. Inkjet printers have a print head cleaning function specifically for this reason — banding is their most common print quality failure mode.

  2. 2.A laser printer's output shows repeated small stains or dots at regular intervals down the page. What does this pattern indicate?

    • A.A damaged fuser roller leaving marks at each revolution
    • B.Low ink level in the cartridge
    • C.A paper feed roller that needs cleaning
    • D.Incorrect paper size detected by the printer

    Answer: A. A damaged fuser roller leaving marks at each revolution. Regular, evenly spaced marks or stains down a laser-printed page indicate a contaminated or damaged roller (drum, fuser, or transfer roller) leaving marks with each revolution. The spacing between marks corresponds to the roller's circumference, helping identify which roller is responsible. Measure the distance between repeated marks and compare to the roller circumferences to pinpoint the failing component.

  3. 3.A user reports the printer shows as "offline" on their Windows workstation, but the printer is powered on and connected to the network. Other users can print to it successfully. What is the MOST likely cause?

    • A.The printer is out of paper
    • B.The printer's IP address has changed, and the workstation's printer port needs updating
    • C.The printer driver needs to be reinstalled on the printer
    • D.The network switch port the printer is connected to has failed

    Answer: B. The printer's IP address has changed, and the workstation's printer port needs updating. If the printer is online for other users but shows offline for one workstation, that workstation's printer configuration is pointing to an old IP address that no longer matches the printer's current address. A switch port failure would affect all users. Update the printer's TCP/IP port configuration on the affected workstation to match the current printer IP address, or configure the printer with a static IP.

  4. 4.After replacing a laser printer's toner cartridge, prints show faint horizontal lines at regular intervals across the page. What component is most likely causing this?

    • A.Fuser assembly
    • B.Transfer belt
    • C.Imaging drum
    • D.Pickup roller

    Answer: C. Imaging drum. Regular horizontal bands or lines repeating at intervals corresponding to the drum circumference indicate a damaged or worn imaging (photosensitive) drum that is not holding the electrostatic charge uniformly. The fuser assembly causes issues like toner smearing or not fusing. Pickup roller problems cause paper feed failures.

  5. 5.A laser printer produces pages with random black speckling (small black dots) scattered across the entire page. What is the MOST likely cause?

    • A.The transfer roller is contaminated with loose toner particles
    • B.The paper is damp or of poor quality
    • C.The fuser temperature is too low
    • D.The printer is using the wrong paper size

    Answer: A. The transfer roller is contaminated with loose toner particles. Random black speckling across an entire laser-printed page is typically caused by loose toner particles on the transfer roller or drum contaminating the page during the transfer process. Damp paper causes other quality issues like poor toner adhesion, not random speckling. Speckling often resolves by cleaning the internal paper path and transfer components with a lint-free cloth.

Learn 5.6 and every other objective

Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.

Start my A+ Core 1 path

No account needed to start.

More objectives in Domain 5.0

← All A+ Core 1 220-1201 objectives