CompTIA A+ Core 1 · 220-1201
Objective 3.2: Cable types and their connectors, features and purposes
Try it now: 8 quick questions on this objective, no account needed.
Objective 3.2 · Cables and connectors
1 / 8Multimode fiber (MMF)
Which max speed?
Practice questions for A+ Core 1 objective 3.2, “Cable types and their connectors, features and purposes.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 3.0: Hardware, which is about 25% of the exam — so mastering it moves your readiness score meaningfully.
More 3.2 practice questions
Objective 3.2 · practice questions
1 / 5Which USB connector type is reversible and used on both hosts and devices in USB 3.1 and later standards?
All 5 questions, with answers
1.Which USB connector type is reversible and used on both hosts and devices in USB 3.1 and later standards?
- A.USB-A
- B.USB-B
- C.USB Micro-B
- D.USB-C
Answer: D. USB-C. USB-C features a symmetrical oval connector that can be inserted in either orientation, eliminating the need to orient the plug correctly. USB-A is the rectangular host connector found on computers and is not reversible. USB-B and Micro-B are device-side connectors with specific orientations required for insertion.
2.Which USB version introduced the blue-colored Type-A connector to visually distinguish it from USB 2.0 ports on devices?
- A.USB 1.1
- B.USB 2.0
- C.USB 3.0
- D.USB 4.0
Answer: C. USB 3.0. USB 3.0 introduced the blue color coding for Type-A connectors and ports to help users visually distinguish SuperSpeed USB 3.0 ports from the older black or white USB 2.0 ports. USB 4.0 uses the USB-C connector form factor. USB 1.1 ports were typically white or gray.
3.A technician needs to connect a new monitor that supports 144 Hz refresh rate at 2560x1440 resolution. Which cable interface can reliably support this without an adapter?
- A.VGA
- B.DVI-D Single Link
- C.DisplayPort 1.2
- D.HDMI 1.4
Answer: C. DisplayPort 1.2. DisplayPort 1.2 supports bandwidth sufficient for 2560x1440 at 144 Hz (QHD 144 Hz), making it the appropriate choice. HDMI 1.4 is limited to 1080p at 120 Hz or 4K at 30 Hz. DVI-D Single Link supports only up to 1920x1200 at 60 Hz. VGA is analog and cannot support high refresh rates at modern resolutions.
4.Which coaxial cable type is most commonly used for cable television (CATV) distribution to homes?
- A.RG-59
- B.RG-6
- C.RG-8
- D.RG-58
Answer: B. RG-6. RG-6 coaxial cable is the standard for cable television and satellite distribution because it supports higher frequencies with lower signal loss than RG-59. RG-59 has a thinner center conductor and higher attenuation, making it unsuitable for modern CATV. RG-8 and RG-58 are used in radio frequency and older networking applications.
5.A user connects a laptop to a 4K TV through a USB-C to HDMI adapter. The picture appears, but the mouse pointer and videos look choppy, and Windows shows 3840×2160 at 30 Hz. The laptop and the TV both support 4K at 60 Hz. What should the technician do?
- A.Use an adapter that supports 4K at 60 Hz (HDMI 2.0)
- B.Set the TV's color mode to sRGB to cut bandwidth
- C.Turn on overscan in the TV's picture size settings menu
- D.Charge the laptop through a different USB-C port
Answer: A. Use an adapter that supports 4K at 60 Hz (HDMI 2.0). Many USB-C to HDMI adapters only output HDMI 1.4 signals, which carry 3840×2160 at no more than 30 Hz, so motion looks choppy; an adapter rated for HDMI 2.0 and 4K at 60 Hz, with a cable rated for it, fixes it. The TV's color mode and overscan don't change the signal the adapter sends, and which port charges the laptop has nothing to do with the video.
Learn 3.2 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.