CompTIA A+ Core 1 · 220-1201

Objective 3.1: Display components and attributes

Try it now: 8 quick questions on this objective, no account needed.

Objective 3.1 · Displays

1 / 8
Quick scenario

A monitor's specifications list '98% DCI-P3.' Which display attribute does this describe?

Practice questions for A+ Core 1 objective 3.1, “Display components and attributes.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.

This objective sits in Domain 3.0: Hardware, which is about 25% of the exam — so mastering it moves your readiness score meaningfully.

More 3.1 practice questions

Objective 3.1 · practice questions

1 / 5
Exam style

A graphic designer needs a laptop with the most accurate colour reproduction and widest viewing angles for professional photo editing. Which display technology is most appropriate?

All 5 questions, with answers
  1. 1.A graphic designer needs a laptop with the most accurate colour reproduction and widest viewing angles for professional photo editing. Which display technology is most appropriate?

    • A.TN LCD
    • B.IPS LCD
    • C.VA LCD
    • D.Reflective LCD

    Answer: B. IPS LCD. IPS (In-Plane Switching) panels are the preferred choice for colour-critical work because they maintain colour accuracy across nearly 178 degrees of viewing angle horizontally and vertically. TN panels have narrow viewing angles and poor colour fidelity. VA panels offer higher contrast than IPS but still exhibit colour shift at wide angles, making them less ideal for professional colour work.

  2. 2.A video editor wants a bright HDR monitor with deep contrast but will leave static timelines and toolbars on screen ten hours a day and is worried about burn-in. Which display technology fits BEST?

    • A.OLED
    • B.TN LCD with an edge-lit backlight
    • C.Mini LED
    • D.IPS LCD with an edge-lit backlight

    Answer: C. Mini LED. Mini LED's many local dimming zones give high brightness and strong contrast for HDR, and because the light comes from a backlight rather than the pixels themselves, static toolbars don't burn in the way they can on OLED. OLED has excellent contrast but is the technology most prone to burn-in, and edge-lit TN and IPS panels can't dim parts of the screen independently, which limits their HDR contrast.

  3. 3.A technician replaces a laptop's LCD panel but the touch functionality no longer works after reassembly. Which component was most likely damaged or not reconnected during the repair?

    • A.The inverter board
    • B.The Wi-Fi antenna
    • C.The digitizer
    • D.The GPU heat pipe

    Answer: C. The digitizer. The digitizer is a transparent layer bonded over the display that detects touch input; if its ribbon cable is disconnected or the layer itself is cracked during disassembly, touch functionality is lost while the display image remains normal. The inverter board (in older CCFL displays) controls backlighting, not touch. Wi-Fi antennas run through the display lid but have no role in touch sensing.

  4. 4.A laptop display has a resolution of 1920x1080 on a 15.6-inch screen. A replacement panel is 1920x1080 on a 17.3-inch screen. If installed, what display issue will occur?

    • A.The image will be compressed and appear zoomed in
    • B.The image will appear correct because the resolution is the same
    • C.The image will appear stretched and have lower pixel density (DPI), appearing less sharp
    • D.The laptop BIOS will reject the incompatible panel

    Answer: C. The image will appear stretched and have lower pixel density (DPI), appearing less sharp. The same resolution spread across a larger physical screen results in lower pixels per inch (PPI), meaning each pixel is physically larger and the image will appear less sharp or slightly blurry compared to the original panel. The image may fill the screen correctly (not stretched geometrically) but will simply look less crisp. The BIOS does not validate display size and will not reject a physically compatible panel connector.

  5. 5.A customer wants a monitor marketed as 4K UHD. Which screen resolution will it have?

    • A.1920×1080
    • B.2560×1440
    • C.3840×2160
    • D.7680×4320

    Answer: C. 3840×2160. 4K UHD is 3840×2160, four times the pixels of 1920×1080 (Full HD), which is why it looks sharper at the same size. 2560×1440 is QHD, often called 1440p, and 7680×4320 is 8K UHD.

Learn 3.1 and every other objective

Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.

Start my A+ Core 1 path

No account needed to start.

More objectives in Domain 3.0

← All A+ Core 1 220-1201 objectives