CompTIA A+ Core 1 · 220-1201
Objective 3.6: Install the right power supply
Try it now: 8 quick questions on this objective, no account needed.
Objective 3.6 · Power supplies
1 / 8Which PSU connector provides the primary power to an ATX motherboard and has 24 pins?
Practice questions for A+ Core 1 objective 3.6, “Install the right power supply.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 3.0: Hardware, which is about 25% of the exam — so mastering it moves your readiness score meaningfully.
More 3.6 practice questions
Objective 3.6 · practice questions
1 / 5A discrete GPU requires a PCIe 8-pin power connector. The technician's PSU only has a PCIe 6-pin connector. What should be done?
All 5 questions, with answers
1.A discrete GPU requires a PCIe 8-pin power connector. The technician's PSU only has a PCIe 6-pin connector. What should be done?
- A.Use the 6-pin connector; the GPU will use the available pins
- B.Use a PCIe 6-pin to 8-pin adapter cable
- C.Use two SATA power connectors bridged together
- D.Connect the GPU to the 24-pin ATX connector instead
Answer: B. Use a PCIe 6-pin to 8-pin adapter cable. PCIe 6-to-8-pin adapter cables are commonly included with GPUs or PSUs to allow a 6-pin source to connect to an 8-pin GPU connector, though this should only be used within the wattage limits of the PSU and connector. Using only a 6-pin on an 8-pin connector can cause the GPU to throttle or fail to operate. SATA-to-PCIe adapters exist but are considered fire hazards under high load.
2.A small form factor (SFF) desktop uses a TFX-style power supply rather than a standard ATX PSU. A technician needs to replace it. What must they consider?
- A.TFX PSUs use different voltage rails than ATX PSUs
- B.TFX PSUs have the same form factor as ATX and are interchangeable
- C.The replacement must be a TFX form factor to fit the SFF case
- D.TFX PSUs only support up to 250W output
Answer: C. The replacement must be a TFX form factor to fit the SFF case. TFX (Thin Form Factor) power supplies have a specific smaller physical footprint designed for SFF cases; the replacement must match the TFX form factor to physically fit. TFX PSUs use the same ATX connector specifications and voltage rails as standard ATX PSUs. TFX PSUs are available in various wattage ratings, not limited to 250W.
3.What does 80 Plus Gold certification indicate about a power supply?
- A.It can output 80W of power guaranteed
- B.It operates at 87-90% efficiency at 20%, 50%, and 100% loads
- C.It has gold-plated connectors for reliability
- D.It uses a single +12V rail architecture
Answer: B. It operates at 87-90% efficiency at 20%, 50%, and 100% loads. 80 Plus Gold certification means the PSU achieves at least 87% efficiency at 20% load and 90% efficiency at 50% load, reducing wasted energy as heat. The certification has nothing to do with connector materials or output wattage limits. Higher tiers (Platinum, Titanium) achieve even greater efficiency percentages.
4.A technician measures voltages on a running PSU using a multimeter. The +12V rail reads 11.4V under load. What does this indicate?
- A.Normal operation within ATX tolerance
- B.PSU is failing — voltage is out of ATX specification
- C.The multimeter requires calibration
- D.The CPU is overclocked too aggressively
Answer: B. PSU is failing — voltage is out of ATX specification. The ATX specification allows ±5% tolerance on the +12V rail, meaning acceptable range is 11.4V to 12.6V; however, 11.4V is right at the edge of tolerance and indicates the PSU is struggling under load, a sign of aging or undersized PSU. Voltages consistently below 11.4V are definitively out of specification. This symptom warrants PSU replacement to prevent instability.
5.Which PSU connector type is used to power PCIe graphics cards and comes in 6-pin and 8-pin variants?
- A.EPS CPU connector
- B.Molex peripheral connector
- C.PCIe power connector
- D.SATA power connector
Answer: C. PCIe power connector. PCIe power connectors (6-pin providing 75W and 8-pin providing 150W) are used to supply additional power to discrete graphics cards beyond the 75W available from the PCIe slot itself. The EPS connector powers the CPU. Molex connectors power older peripherals. SATA power connectors power storage devices.
Learn 3.6 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.