CompTIA A+ Core 1 · 220-1201
Objective 3.3: RAM characteristics
Try it now: 8 quick questions on this objective, no account needed.
Objective 3.3 · RAM
1 / 8Which RAM form factor would a technician install into a standard full-tower desktop motherboard?
Practice questions for A+ Core 1 objective 3.3, “RAM characteristics.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 3.0: Hardware, which is about 25% of the exam — so mastering it moves your readiness score meaningfully.
More 3.3 practice questions
Objective 3.3 · practice questions
1 / 5Which characteristic distinguishes DDR5 from DDR4 in terms of on-module design?
All 5 questions, with answers
1.Which characteristic distinguishes DDR5 from DDR4 in terms of on-module design?
- A.DDR5 uses a 288-pin connector identical to DDR4
- B.DDR5 integrates a power management IC (PMIC) directly on the module
- C.DDR5 requires a higher 1.5V operating voltage
- D.DDR5 uses a 240-pin connector for backward compatibility
Answer: B. DDR5 integrates a power management IC (PMIC) directly on the module. DDR5 moves the voltage regulator circuitry onto the module itself as a PMIC (Power Management Integrated Circuit), shifting power regulation from the motherboard to each DIMM for better stability and more precise voltage control. DDR5 uses 288 pins but with a different notch position than DDR4, preventing cross-installation. DDR5 operates at 1.1V, lower than DDR4's 1.2V.
2.A workstation RAM module is labeled DDR4-3200. What does 3200 refer to?
- A.Module capacity in megabytes
- B.Data transfer rate in megatransfers per second
- C.Module latency in nanoseconds
- D.Clock frequency in MHz
Answer: B. Data transfer rate in megatransfers per second. The number in DDR4-3200 refers to the effective data transfer rate of 3200 megatransfers per second (MT/s), which is double the actual clock speed of 1600 MHz due to DDR's double data rate operation. The "DDR" prefix itself indicates data is transferred on both the rising and falling edges of the clock. Module capacity is expressed in gigabytes separately.
3.Which DDR generation introduced a maximum speed of 3200 MT/s as its top standard speed and operates at 1.2V?
- A.DDR3
- B.DDR4
- C.DDR5
- D.DDR2
Answer: B. DDR4. DDR4 operates at 1.2V (compared to DDR3's 1.5V) and standard speeds range from DDR4-1600 up to DDR4-3200 MT/s. DDR3 tops out at around DDR3-2133 MT/s at 1.5V. DDR5 begins at 4800 MT/s and operates at 1.1V with on-die ECC.
4.A technician is installing DDR4 RAM but the module will not seat in the slot despite firm pressure. What is the most likely cause?
- A.The module is defective
- B.The module is being inserted in the wrong direction due to misaligned notch
- C.The slot is covered by the CPU cooler
- D.DDR4 is incompatible with this motherboard's chipset
Answer: B. The module is being inserted in the wrong direction due to misaligned notch. DDR4 DIMMs have a single notch off-center that acts as a key to ensure correct orientation; if the module is reversed, the notch will not align with the ridge in the slot and it will not seat. Each DDR generation has the notch in a different position to prevent cross-generation installation. A defective module or chipset incompatibility would not cause a physical seating issue.
5.What does the CAS latency value in a RAM specification such as CL16 represent?
- A.The number of memory channels supported
- B.The clock cycles between a read command and data output
- C.The operating voltage of the module
- D.The number of ranks on the module
Answer: B. The clock cycles between a read command and data output. CAS (Column Address Strobe) latency is the number of clock cycles that elapse between a memory controller issuing a read command and the data becoming available. Lower CAS latency values indicate faster response times. Voltage and rank count are separate specifications listed alongside CAS latency.
Learn 3.3 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.