CompTIA A+ Core 1 · 220-1201
Objective 1.3: Configure mobile device network connectivity and support applications
Try it now: 8 quick questions on this objective, no account needed.
Objective 1.3 · Mobile networking and app support
1 / 8Which generation of cellular technology introduced the first truly broadband mobile data experience with LTE?
Practice questions for A+ Core 1 objective 1.3, “Configure mobile device network connectivity and support applications.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 1.0: Mobile Devices, which is about 13% of the exam — so mastering it moves your readiness score meaningfully.
More 1.3 practice questions
Objective 1.3 · practice questions
1 / 5An MDM compliance report flags a salesperson's phone as noncompliant with the reason 'Device is rooted.' The salesperson had installed unofficial software to remove the carrier's restrictions. What will the compliance policy typically do?
All 5 questions, with answers
1.An MDM compliance report flags a salesperson's phone as noncompliant with the reason 'Device is rooted.' The salesperson had installed unofficial software to remove the carrier's restrictions. What will the compliance policy typically do?
- A.Nothing, since rooting only affects the user's personal apps
- B.Repair the operating system and remove root access
- C.Raise the phone's data plan to an unlimited tier
- D.Block company email and apps until the phone complies
Answer: D. Block company email and apps until the phone complies. A rooted (or jailbroken) phone has had its built-in protections removed, so MDM policy enforcement marks it noncompliant and blocks company email, apps and data until it's back in a supported state, usually by restoring the official OS. Rooting weakens security for everything on the phone, not just personal apps; MDM can't undo it remotely; and the data plan has nothing to do with compliance.
2.A technician sets up a mobile hotspot on a smartphone for a travelling executive. The hotspot is visible but other devices fail to connect. What is the most likely cause?
- A.The smartphone does not have an NFC chip
- B.The Wi-Fi password entered on the connecting device is incorrect
- C.The hotspot requires a wired connection to function
- D.The smartphone's Bluetooth is not paired with the connecting device
Answer: B. The Wi-Fi password entered on the connecting device is incorrect. The most common reason a visible hotspot fails to connect is an incorrectly entered Wi-Fi password on the client device; the hotspot network is visible (proving it is broadcasting) but authentication fails. NFC is unrelated to Wi-Fi hotspot operation. A hotspot is wireless by definition — no wired connection is required. Bluetooth pairing is not needed to connect to a Wi-Fi hotspot.
3.Which generation of cellular technology introduced the first truly broadband mobile data experience with LTE?
- A.3G
- B.4G
- C.5G
- D.2G
Answer: B. 4G. 4G LTE (Long Term Evolution) delivered mobile broadband speeds typically in the range of 10-100 Mbps, enabling streaming video, video calling, and cloud applications on mobile devices. 3G introduced mobile data but at much slower speeds (typically under 10 Mbps) with technologies like HSPA. 5G further increases speeds and dramatically reduces latency compared to 4G.
4.A user's smartphone shows full LTE bars but they report that app downloads are very slow. Which setting should the technician check first?
- A.Whether the device is in Airplane mode
- B.Whether a data cap or throttling limit has been reached on the mobile plan
- C.Whether Bluetooth is interfering with the LTE signal
- D.Whether the SIM card needs to be re-inserted
Answer: B. Whether a data cap or throttling limit has been reached on the mobile plan. Many mobile carriers throttle data speeds after the user's high-speed data allowance is consumed; the device shows full signal bars (physical layer is fine) but application-layer throughput is severely limited by the carrier. Airplane mode disables all radios, so the device would show no signal bars at all. Bluetooth operates in the 2.4 GHz band and does not interfere with LTE bands.
5.An MDM administrator needs to remotely erase all corporate data from an employee's personal smartphone when the employee resigns, without affecting personal photos and apps. Which MDM feature accomplishes this?
- A.Full device wipe
- B.Remote lock
- C.Selective wipe (container wipe)
- D.Remote password reset
Answer: C. Selective wipe (container wipe). Selective wipe (or container wipe) removes only the managed corporate data, apps, and profiles from the device while leaving the user's personal data intact; this is a key feature of BYOD (Bring Your Own Device) MDM policies. A full device wipe erases all data, including personal content, which is inappropriate for a personal device. Remote lock restricts access but does not remove corporate data.
Learn 1.3 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.