CompTIA A+ Core 1 · 220-1201
Objective 2.5: Common networking hardware devices
Try it now: 8 quick questions on this objective, no account needed.
Objective 2.5 · Networking hardware
1 / 8Which device is responsible for directing traffic between different IP networks and determining the best path for data packets?
Practice questions for A+ Core 1 objective 2.5, “Common networking hardware devices.” Every question is original, written to the 220-1201 exam objectives, and comes with a full explanation — answer them below to see instant grading.
This objective sits in Domain 2.0: Networking, which is about 23% of the exam — so mastering it moves your readiness score meaningfully.
More 2.5 practice questions
Objective 2.5 · practice questions
1 / 5What is the primary function of a patch panel in a structured cabling installation?
All 5 questions, with answers
1.What is the primary function of a patch panel in a structured cabling installation?
- A.Amplify network signals over long cable runs
- B.Provide a central termination point for horizontal cabling runs
- C.Route traffic between VLANs
- D.Convert digital signals to analog for DSL transmission
Answer: B. Provide a central termination point for horizontal cabling runs. A patch panel provides a fixed, organised termination point for horizontal cable runs from wall jacks, allowing flexible connections to switches via short patch cables. This makes moves, adds, and changes easier without disturbing the permanent cabling infrastructure. Patch panels are passive devices — they provide no amplification, routing, or signal conversion.
2.A technician needs to connect multiple devices on a LAN so that traffic from one device is sent only to the intended destination device. Which device should be deployed?
- A.Hub
- B.Switch
- C.Repeater
- D.Bridge
Answer: B. Switch. A managed or unmanaged switch uses MAC address tables to forward frames only to the port where the destination device resides, reducing unnecessary traffic on the network. A hub broadcasts all incoming traffic out every port regardless of destination, wasting bandwidth and creating collisions. Switches operate at OSI Layer 2 and are the standard device for modern LAN connectivity.
3.Which device converts the signal from a fiber optic line from an ISP into an Ethernet connection usable by a home router?
- A.Cable modem
- B.DSL modem
- C.Optical Network Terminal (ONT)
- D.Wireless access point
Answer: C. Optical Network Terminal (ONT). An ONT (Optical Network Terminal) is the customer-premises device that terminates a fiber optic connection from the ISP's network and converts the optical signal to an electrical Ethernet signal. A cable modem converts DOCSIS signals from coaxial cable, while a DSL modem works over telephone lines. The ONT is typical in FTTH (Fiber to the Home) deployments.
4.A technician notices that a legacy hub is causing performance problems because all devices share the same collision domain. Which replacement device would create individual collision domains for each connected device?
- A.Repeater
- B.Bridge
- C.Switch
- D.Passive splitter
Answer: C. Switch. A switch places each port in its own collision domain, so devices can transmit simultaneously without collisions using full-duplex communication. A hub places all connected devices in a single collision domain, so only one device can transmit at a time using CSMA/CD. A repeater and bridge also reduce collision domains but a switch is the correct modern replacement that provides per-port isolation.
5.A network administrator is reviewing the benefits of using a managed switch over an unmanaged switch. Which capability is exclusive to a managed switch?
- A.Connecting multiple devices via Ethernet ports
- B.Forwarding frames based on MAC addresses
- C.Configuration of VLANs, port security, and SNMP monitoring
- D.Providing PoE power to connected devices
Answer: C. Configuration of VLANs, port security, and SNMP monitoring. Managed switches provide a full management interface (CLI, web GUI, or API) that allows administrators to configure VLANs, port security, QoS, SNMP monitoring, port mirroring, STP settings, and link aggregation. Unmanaged switches forward frames using MAC addresses and support PoE (if PoE-capable) but offer no configuration interface. The ability to segment, monitor, and control network behaviour is the primary value of managed switches in enterprise environments.
Learn 2.5 and every other objective
Your A+ Core 1 path walks the whole exam in short stops, one objective at a time, and maps where you stand as you go.
Start my A+ Core 1 pathNo account needed to start.